CamassCrete
CamassCrete
The patented Cable Trench system, a continuous grid-form cable trenches throughout the floor plan, provides free accessibility to users and maximum capacity for network's cable distribution and extension. The unique invention Socket-Set-Screw system contributes super-low installation at FFH (finish floor height) from 60 mm down to 40 mm, which provides cable trench clearance at 55 mm ~ 35 mm. As to structure, the system retains steel-cementitious access floor's fundamental functions such as high concentration load, and high rolling load property.
Reticulated Cable Trench System: Grid-form Cable Trench system provides cable runway inside width 11 cm (4.33") within every 60 cm. The trench caps are easily lifted and accessible by access floor installers, network technicians, and office users.
Low-Profile, conserve ceiling height: The unique Socket-Set Screw system enables installation height low to 4 cm ~ 6 cm (1.57" ~ 2.36") while still facilitate high cable capacity running inside the Cable Trenches.
Stability: The self-stand UniPanels (main panel) is structured with 4 pedestals at four corner of the panel. The UniPanels, with four built-in pedestals, are standing independently. In the event of earthquake or unusual strong impact, the system will not be collapsed.
Safety, No hazard: During re-routing or re-location, the technicians or office users just lift the Cable Trench caps by hand, or by regular screwdriver. If the site was installed with traditional access floor, the user has to use special tool, such as panel lifter, to lift the panel. Each steel cementitious structured access panel is normally weighted 12 to 15 kg (26 to 33 lb) per piece and it is not safe to operate by office people and may cause hazard.
