The basic rules to follow when installing wall panels are:
Before installation:
1. A dry surface (<3%CM), clean of dust and construction waste, even and aligned. Installation over putty, which is partially unglued or/and uneven must not be made.
2. The room temperature should be between +15 and +25 ºС.
3. Other construction works, which could interfere with the wall panel installation should not be going on.
Installation includes the following actions:
1. Shipping of materials to the site
2. Materials stay in the romm for 24 hour at temperatures between +15°C and +29°C. The same applies to the glue and ground coat. When installing the wall panels the temperature in the room should be the same and the humidity should not be over 75%.
3. Unpacking and obligatory checkfor blemishes and color diferences.
4. Material cutting. After that, the materials are left to subside, depending on their type.
6. Gluing. The glue for wall panels is different than the one for floorings
7. Welding - the gaps are filled. It is made 24 hours after laying of the materials.
The following actions are not included in installation:
1. Floor cleaning after installation.
2. Moving of furniture and other items. as well as taking them out of the room. The rooms should be empty and there should not be any other construction works going on.
